Electron beam processed surface textures on titanium alloys for fluid-drag reduction

Ti-6Al-4V and Ti-4Al-1.5Mn alloys were employed for electron beam processing with the aim to produce surface textures efficient for fluid-drag reduction. The as-resulted surface textures were examined by using advanced optical microscopy for surface morphology analysis, optical microscopy and scanning electron microscopy for near-surface microstructure observation. The titanium model with electron beam processed surface textures was tested in wind tunnel to evaluate their fluid-drag reduction efficiency. It showed that the as-resulted non-smooth surface was characterized by parallel ridges and grooves, with height and spacing able to be customized by adjusting processing parametres. The ridges displayed continuous scales while the valley of grooves presented V-shaped ripples. Their dimensions were also related to and could be controlled by processing parametres. Further, the near-surface region was occupied by fusion zone, heat-affected zone and base metal from the outermost surface to the underlying bulk alloy. The microstructure of fusion zone was characterized by martensite phase. A heat-affected zone was sandwiched between fusion zone and the underlying base metal, with different microstructural features compared to both fusion zone and the base metal. With respect to fluid-drag reduction efficiency, titanium model with electron beam processed surface textures exhibits a reducing efficiency over 15% at attack angles of 0° and ±1°, with an air flow velocity at 24 m/s.     

Plasma Unesterified Fatty‐Acid Profile Is Dramatically and Acutely Changed under Ischemic Stroke in the Mouse Model

Although plasma biomarkers would facilitate rapid and accurate diagnosis of ischemic stroke for immediate treatment, no such biomarkers have been developed to date. In the present study, we tested our hypothesis that plasma unesterified fatty acids (FFA) are altered at early stages of acute ischemic stroke. Plasma was collected from mice 2 h after the permanent middle cerebral artery occlusion (pMCAo) onset, as well as from sham operated and control animals. After 2 h, pMCAo significantly changed the plasma FFA profile with the most dramatic 2‐ to 3‐fold relative increase in very long n‐3 and n‐6 FFA including 20:4n‐6, 22:4n‐6, 22:5n‐6, and 22:6n‐3. Changes in the plasma FFA profile are consistent with FFA liberation from brain phospholipid hydrolyzed under ischemic insult. These results identify, for the first time, the plasma FFA profile as a potential biomarker for an early ischemic stroke within the therapeutic window for thrombolytic treatment. Further studies are required to confirm its specificity and sensitivity in clinical settings.     

Research on heat dissipation performance and flow characteristics of air‐cooled battery pack

With the depletion of fossil fuels and the aggravation of environmental pollution, the research and development speed of electric vehicles has been accelerating, and the thermal management of battery pack has become increasingly important. This paper selects the electric vehicle battery pack with natural air cooling as the study subject, conducts simulation analysis of the heat dissipation performance of battery packs with and without vents. Then this paper researches on the influence of internal flow field and external flow field. Field synergy principle is used to analyze the effect of velocity field and temperature field amplitude. The results show the following: it is found that the maximum temperature rise and the internal maximum temperature difference of the battery pack with vents are reduced by about 23.1% and 19.9%, raising speed value can improve the heat dissipation performance, and raising temperature value can decrease the heat dissipation performance. Reasonable design of the vents can make the inner and outer flow field work synergistically to achieve the best cooling effect. Then the reference basis for the air cooling heat dissipation performance analysis of electric vehicle, battery pack structure arrangement, and air‐inlet and air‐outlet pattern choosing are offered.     

Collective reflection strategy for moderating conformity tendency and promoting reflective judgment performance

Reflective judgement is crucial for medical-related practitioners in dealing with controversial issues. However, the conformity phenomenon is likely to occur and interfere with reflective judgement learning during interactive activities. Effective strategies are required to moderate the conformity behaviour tendency (CBT) and improve reflective judgement performance (RJP). This study demonstrates two significant results: (a) Compared with the guided self-reflection learning strategy, the online collective reflection (OCR) learning strategy effectively weakened the learners' general CBT while dealing with professional controversial issues; and (b) a significantly negative correlation between the RJP achieved and the change of CBT in online environment was detected in the OCR group. The implications and potential applications in higher education were discussed. Further studies are needed to confirm the long-term effects and the extending application to other professional studies.     

Auto synchronous bandpass filter based on indium-doped CdS

Samples were grown on glass substrates of CdS doped with different levels of indium via the chemical bath technique. The samples obtained were optically characterized to determine their band-gap. A capacitor of parallel plates is constructed with the CdS samples placed between the plates; afterward, light with energy above the band-gap is used to generate carriers in the CdS to modify its dielectric properties and therefore the capacitance. The sample that causes greater current through the capacitor is used to form part of the tank circuit of a bandpass filter because this tank circuit determines the frequency of resonance or passage of the filter, thus forming a bandpass filter whose resonance frequency depends on the intensity of light that impinges on the CdS sample. Finally, the frequency responses of the filter when the sample is not illuminated compared to that when it is illuminated are studied to demonstrate a filter whose resonance frequency can be effectively controlled by light via the use of indium-doped CdS.     

EGGS: Sparsity-Specific Code Generation

Sparse matrix computations are among the most important computational patterns, commonly used in geometry processing, physical simulation, graph algorithms, and other situations where sparse data arises. In many cases, the structure of a sparse matrix is known a priori, but the values may change or depend on inputs to the algorithm. We propose a new methodology for compile-time specialization of algorithms relying on mixing sparse and dense linear algebra operations, using an extension to the widely-used open source Eigen package. In contrast to library approaches optimizing individual building blocks of a computation (such as sparse matrix product), we generate reusable sparsity-specific implementations for a given algorithm, utilizing vector intrinsics and reducing unnecessary scanning through matrix structures. We demonstrate the effectiveness of our technique on a benchmark of artificial expressions to quantitatively evaluate the benefit of our approach over the state-of-the-art library Intel MKL. To further demonstrate the practical applicability of our technique we show that our technique can improve performance, with minimal code changes, for mesh smoothing, mesh parametrization, volumetric deformation, optical flow, and computation of the Laplace operator.     

Warping of a Stretched Bimetallic Sheet

Strength of Materials - The development of bimetallic materials is one of the modern lines of research. The differences in the properties of components can impart special mechanical characteristics...     

Investigation of the grinding temperature and energy partition during cylindrical grinding

In this study, the distribution of temperature and energy under the process parameter conditions and thermal physical parameters are investigated using a physics-based model via the finite element modeling (FEM) simulation and experimental validation during cylindrical grinding. A cylindrical grinding model is modeled to simulate the chip removal behavior in the grinding process and to measure the workpiece and chip temperatures by refining the temperature field. Workpiece speed affects the energy partition into chip more obviously than other grinding parameters. Reasonable selection of grinding parameters greatly reduces the energy partition into the workpiece from 80% to 50–30% or even lower. This study offers a comprehensive understanding of heating mechanisms during grinding and thus is very beneficial for process optimization.     

Effect of nonsolvent additives on PES ultrafiltration membrane pore structure

Different nonsolvent additives, namely, diethylene glycol, n-butyl alcohol (NBA), and ethylene glycol monomethyl ether, were added into the casting solution (polyethersulfone/dimethylformamide/lithium chloride) to prepare ultrafiltration (UF) membrane via phase inversion. The effects of different additives and their concentration on the pore structure of the prepared UF membrane were studied. The cross-sectional morphology of the membrane was observed via scanning electron microscopy. The addition of nonsolvent additives improved the large-cavity structure of the membrane. When the additive was low-content NBA (1–3 wt %), the membrane pore structure transformed from large-cavity structure to fully sponge-like structure. When the content of additive NBA was 3 wt %, the flux of the prepared UF membrane was 130.45 L (m⁻² h⁻¹), the rejection of PEG20000 was 95.54% and the flux remained high at 4 bar in long-term stability test. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47525.     

Effect of Pin Diameters on the Wear Characteristics of Friction Pairs

Strength of Materials - The tribological tests are carried out to assess the effect of pin diameters on wear characteristics via changing contact stresses and sliding speeds to provide support for...